VOER EEN ZOEKWOORD IN

FEP polymeer

FEP polymeer

FEP polymeer

fep polymer (Fluorinated ethylene propylene) is een co polymer van hexafluoropropylene en tetrafluoroethylene. Hoewel FEP en PTFE in vele facetten gelijk zijn, zijn er ook duidelijke verschillen.

  • Lagere bestandheid tegen temperatuur. Voor FEP geldt een continu belasting van 205 C
  • Hogere wrijvingscoëfficiënt
  • Transparanter dan PTFE
  • betere gas- en damp permeabiliteit
  • uitstekende UV-transmissie

Folies gemaakt van FEP polymer zijn beschikbaar uit voorraad in diktes tussen de 25 en 1000 micron.

Zie de typische waarden van FEP polymer in te tabel hieronder:

PROPERTY VALUE UNITS METHOD
Mechanical Properties
Tensile Strength, 23°C 2100-3050
14.5-21
psi
MPa
Elongation at break, 23°C 240-300 %
Flexural Strength, 23°C No break at flexure D 790
Impact Strength, Izod No break
Yield Strength At 23°C 1740
12
psi
MPa
Density 2.12-2.17 gm/cu.cm
Thermal Properties
Coefficient of Linear Expansion 20-100 °C 12 x 10-5 K-1 D 696
Melting Point 253-282 °C
Thermal Conductivity 1.45
0.209
Btu/hr-.ft-deg F
W/m/deg K
Service Temperature -250-200 °C
Processing Temperature 370-395 °C
Electrical Properties
Dielectric Strength, short time, 2mm MV m-1
Surface Arc-Resistance >300
(does not track)
sec D 495
Volume Resistivity, dry, @ 50% RH >1018 ohm-cm D 257
Surface Resistivity, @ 100% RH 1016 Ohm/sq D 257
Dielectric Constant, 60 to 2 x 109 cps 2.1 ε D150-81
Dielectric Strength 13-100 kV mm-1 D149
Dissipation Factor @ 60 Hz – 1 MHz <0.0001 D150-81
Other Properties
Refractive Index 1.344 nD 25 D 542
Water Absorption <0.1 % D570-81
Flame Rating+ VE-0 UL-94
Limiting Oxygen Index 95 % Oxygen D 2863
Resistance to Weathering Excellent
Specific Gravity 2.1-2.3 D792-66
(1979)
Coefficient of friction 0.27–0.67 D 1894

 

Geen reacties

Plaats een reactie

Uw e-mailadres wordt niet gepubliceerd